Ventilation; Environmental Ratings; Front Panel Controls And Connectors; Figure 1: Pspl2600C Front Panel Controls And Connectors - Tektronix PSPL2600C User Manual

Getting started

Ventilation

Environmental ratings

Front panel controls and connectors

2
CAUTION.
Observe the following precautions to maintain proper ventilation:
Do not block any cooling vents.
Do not position any devices adjacent to the instrument that force air (heated or
unheated) into or onto the instrument's surfaces or cooling vents. This additional
airflow could compromise accuracy performance.
When rack mounting the instrument, ensure there is adequate airflow around the
instrument rear and sides to ensure proper cooling. Adequate airflow enables air
temperatures within approximately one inch of the instrument surfaces to remain
within specified limits under all operating conditions.
The following table describes the maximum operating environment ratings for
your instrument.

Table 2: Maximum operating environment ratings

Feature
Temperature
Humidity
Altitude
The front panel of the PSPL2600 is shown in the following figure. The Power
switch is located on the front left side of the instrument. The power indicator
adjacent to the switch lights up when the instrument is on.

Figure 1: PSPL2600C front panel controls and connectors

Description
0 to 40 °C (32 to 104 °F)
80% for temperatures up to 31 °C (88 °F) decreasing linearly
to 50% at 40 °C (104 °F)
2000 m (6562 ft.)
Tektronix PSPL2600C Pulse Generator User Manual