Mitel 6970 Quick Reference Manual page 6

4. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before
adding them to the conference.
5. Tap the Conf softkey again to add Party 3 to the conference. Party 2 and Party 3 will
connect with you to form a conference call.
Meetings
The Mitel 6970 IP Conference Phone supports the MiCollab Meeting Center application,
which provides a list of the user's scheduled conferences and enables easy one-touch
access to conference calls. If enabled, a meeting notification screen will automatically
open when a meeting is about to start. Click the Join button to dial in to the meeting audio
bridge. The phone will automatically dial the meeting ID and PIN (if required).
A list of meetings scheduled for the day can be accessed by tapping the Meetings softkey
from within the idle Home screen.
To join a meeting:
1. On the Home screen, tap the Meetings softkey.
2. Tap a meeting from the list and then tap the Join softkey to join a scheduled meeting.
Or
From within the Meeting Notification screen, tap the Join button.
Your System Administrator must install and configure the MiCollab Meeting Center
application for your Mitel 6970 IP Conference Phone before this feature can be used.
MobileLink
The Mitel 6970 IP Conference Phone supports the MobileLink feature when you are
logged in.
This feature provides seamless mobile phone integration using Bluetooth wireless
technology.
MobileLink enables you to:
• Sync your mobile phone's contact list and call history with your Mitel 6970 IP
Conference Phone.
• Answer a mobile phone call using your Mitel 6970 IP Conference Phone.
• Move mobile call audio between the Mitel 6970 IP Conference Phone and your mobile
phone.
Note: The MobileLink feature requires a specific Connect softkey to be added to the
phone. To add this softkey, contact your System Administrator.
Pairing your Mobile phone:
1. Hot-desk log in to the Mitel 6970 IP Conference Phone.
2. Tap the Settings softkey and select the Bluetooth icon.
3. Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the Bluetooth
toggle switch to the right to enable Bluetooth functionality (a Bluetooth symbol will
appear in the status bar).
TD-K A/S │ Rugbjergvej 10, 4623 Lille Skensved │ +45 70 26 69 00 │ info@td-k.dk