Operation; Startup; Switching On; Light - Mafell K65 18M bl Operating/Safety Instructions Manual

5

Operation

5.1 Startup

These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".

5.2 Switching on

Use the following procedure to switch on the
machine:
1. Press the switch-on lock 4 forward to unlock.
2. With the switch-on lock depressed, actuate and
hold the operating lever (6).
3. Release the switch-on lock 4.
The machine is switched on
✓
Since the switch is not latching, the machine runs only as long as the operating lever is
pressed. Due to the motor concept used here, the machine stops very quickly when it is
switched off. (Motor brake)

5.3 Light

To illuminate a large section of the work area, the
machine is equipped with a light module.
The light module is switched on when the machine is
switched on.
The light module is switched off automatically when
the machine is stopped for some time.
20
Fig. 14: Switching the machine on
Fig. 15: Light module on machine
K65 18M bl/KSS60 18M bl
01/2022