Setup; Unpacking The Vending System; Physical Mounting; Selecting The Copier - Access Control Devices ACD3000 Series User Manual

ACDI

Setup

Unpacking the Vending System

The following equipment is included in your ACD3000 Series shipment:

ACD3000 Series vending unit

Parts Box including:
o
o
o
o

Physical Mounting

Your ACDI Vending System will mount easily to several stands designed and
offered by ACDI, or can be set on a table top or counter.

Selecting the Copier

The ACD3000 series has several preconfigured settings for Copier Type. In
Default mode, the ACD3000 series interfaces with most B&W copiers and
printers. Choose the copier from the list that most closely matches your model
copier. This will adjust the prices and screens to reflect the newly selected
copier model. Specific Interface Instructions are included with each order and
better explain the interface to the mfp.

Changing the Copier Type

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "Setup Menu"
4.
5. Press ENTER to select the Setup Menu
Press FWD until display reads "Select Copier"
6.
Press ENTER, display will read "Copier Default"
7.
8. Press ENTER and a flashing cursor will appear
9. Press FWD or BACK to change the copier type
10. Once display show your preferred Copier Type, press ENTER to save it
11. Press EXIT 2 times followed by EJECT to exit the Service Mode.
Operation and Service Manuals
24V Power Supply
H20-Interface Harness (Copier Specific)
Interface Installation Instructions
ACD3000 Series User & Technical Manual
(Or, current copier type)
Features
2