Pin Time Out - Access Control Devices ACD3000 Series User Manual

ACDI

Pin Time Out

This setting determines how long a pin number will remain engaged without
copier activity.
Follow steps 1 thru 6 from "Disable Delay" above
1.
Press ENTER, display will read "Disable Delay"
2.
Press FWD until display reads "Pin Time Out 00:05:00" (Default Blind
3.
Time is 5 min.)
4. Press ENTER to edit Pin Time Out and a flashing cursor will appear
5. Press FWD to increase Pin Time Out or press BACK to decrease Pin
Time Out
6. Press ENTER to save your new Pin Time Out
Press EXIT, display will read "Delay Menu"
7.
ACD3000 Series User & Technical Manual
13