Adding User Pin Numbers; Clearing User Pin Numbers - Access Control Devices ACD3000 Series User Manual

ACDI
vending and account management all in one machine. To view PIN usage, refer
to the METERS MENU.

Adding User PIN Numbers

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "PIN Menu"
4.
Press ENTER, display will read "User PIN"
5.
Press ENTER, display will read "Add User"
6.
Press ENTER, display will read "Begin Entering PIN"
7.
8. Enter up to 6-digit PIN that you want to add.
Note: Longer pin numbers are more secure.
Press ENTER, display quickly flashes "Adding PIN", "PIN Added"
9.
then defaults to "Begin Entering PIN"
10. Repeat steps 8 and 9 until all desired PINs are added.
11. Press EXIT, display will read "Add User"
12. Press EXIT 3 times followed by EJECT to exit the Service Mode.

Clearing User PIN Numbers

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "PIN Menu"
4.
Press ENTER, display will read "User PIN"
5.
Press ENTER, display will read "Add User"
6.
Press FWD until display reads "Clear PIN"
7.
Press ENTER, display will read "Begin Entering PIN"
8.
9. Enter up to 6-digit PIN that you want to delete and press ENTER
10. Display will read, "Are you sure?"
11. Press ENTER, display quickly flashes "Deleting PIN" and defaults to
"PIN Deleted"
12. Press EXIT, display will read "Clear PIN" and follow steps 7-10 to
delete additional PINs
13. Press EXIT 3 times followed by EJECT to exit the Service Mode .
ACD3000 Series User & Technical Manual
7