Adding Supervisor Pin Numbers; Clearing Supervisor Pin Numbers - Access Control Devices ACD3000 Series User Manual

ACDI

Adding Supervisor PIN Numbers

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "PIN Menu"
4.
Press ENTER, display will read "User PIN"
5.
Press FWD until display reads "Supervisor PIN"
6.
Press ENTER, display will read "Add Supervisor"
7.
Press ENTER, display will read "Begin Entering PIN"
8.
9. Enter up to 6-digit PIN that you want to add. Note: Longer pin
numbers are more secure.
10. Press ENTER, display quickly flashes "Adding PIN", "PIN Added"
then defaults to "Begin Entering PIN"
11. Press EXIT, display will read "Add Supervisor" and follow steps 7-8 to
add additional PINs
12. Press EXIT 3 times followed by EJECT to exit the Service Mode.

Clearing Supervisor PIN Numbers

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "PIN Menu"
4.
Press ENTER, display will read "User PIN"
5.
Press FWD until display reads "Supervisor PIN"
6.
Press ENTER, display will read "Add Supervisor "
7.
Press FWD until display reads "Clear PIN"
8.
Press ENTER, display will read "Begin Entering PIN"
9.
10. Enter the 8-digit PIN that you want to delete and press ENTER
11. Display will read, "Are you sure?"
12. Press ENTER, display quickly flashes "Deleting PIN" and defaults to
"PIN Deleted"
13. Press EXIT, display will read "Clear PIN" and follow steps 9-12 to
delete additional PINs
14. Press EXIT 3 times followed by EJECT to exit the Service Mode.
ACD3000 Series User & Technical Manual
8