Enabling Hidden Pins Mode; Turning The Hidden Pins Mode On Or Off; Delay Settings; Disable Delay - Access Control Devices ACD3000 Series User Manual

ACDI
Press ENTER display will read "Meters Menu"
3.
Press ENTER, display will reads "Read Meters"
4.
Press FWD until display reads "Clear Meters"
5.
Press ENTER 2 time to select Clear Meters, display will read "Press
6.
Enter To Clear"
Press ENTER to clear, display will read, "Are you sure?"
7.
Press ENTER to select continue clearing, display will read "Clearing"
8.
while in process and default back to "Meters Clear"
9. Press EXIT 2 times followed by EJECT to exit out of the Service Mode
and to return to the default Idle Screen

Enabling Hidden Pins Mode

The ACD3000 series card reader has the ability to hide the display of pins as
entered on the top keypad. This added security feature allows for discrete
entering of access pins in public venues.

Turning the Hidden Pins Mode ON or OFF

Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "Setup Menu"
4.
Press ENTER, display will read "Cash Settings"
5.
Press FWD until display reads "Other Settings"
6.
Press FWD until display reads "Hidden Pins Mode Enabled"
7.
8. Press ENTER to toggle between Enabled and Disabled
9. Press EXIT 3 times followed by EJECT to exit the Service Mode and
return to the main Idle Screen

Delay Settings

Disable Delay

This setting determines how long the ACD3000 series reader waits before
disabling the copier.
Useful when last vend or partial pages are an issue.
Enter Supervisor Pin – 73784230
1.
Press ENTER display will read "Service Mode"
2.
Press ENTER display will read "Meters Menu"
3.
Press FWD until display reads "Setup Menu"
4.
Press ENTER, display will read "Cash Settings"
5.
Press FWD until display reads "Delay Menu"
6.
ACD3000 Series User & Technical Manual
11