Table of Contents
Advertisement
Problem
I can make and answer cellular
calls but cannot hear a sound.
I cannot switch cellular calls
from the unit to the cellular
phone.
I cannot make a call using a
landline.
I cannot use a cellular line or a
landline.
When you receive a call for a
cellular line, the ringer volume
is very low.
I cannot make long distance
calls.
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
For assistance, please visit http://shop.panasonic.com/support
TGD66x(en)_0420_ver020.pdf
Cause/solution
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
R The dialing mode may be set incorrectly. Change the
setting (page 16).
R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular
line).
R Ringer volume in "Ring as cell mode" depends on the
cellular phone Bluetooth output level specification. If ring
as cell mode is set to "On (with Talking CID)" or
"On (without Talking CID)", turn this feature off to
use the ringer tones of the handset and base unit
(page 19).
R Make sure that you have long distance service.
Cause/solution
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your phone service
provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may
display or announce the caller's information at the 2nd
ring or later.
R Move closer to the base unit.
67
Useful Information
67
2021/04/21
17:05:39
Advertisement
Table of Contents
