Power-Save Mode; Preset Timing - Sony LKRA-003 Operating Instructions Manual

Power-Save Mode

If no video signal is input or a video signal
not supported is detected, the unit
automatically enters Power-Save mode, with
the backlight of the LCD screen turned off.
The status indicator shows the status of
Power-Save mode as follows:
Flashing in green: No video input
Lit in amber: A video signal not supported
is detected.
The backlight of the LCD screen will
automatically turn on when a supported
video signal is input to the unit.

Preset Timing

This unit displays the picture normally with
the following input signal.
• Resolution: 640 × 480
• Mode: VESA
• Vertical frequency: 59.940 Hz
• Horizontal frequency: 31.469 Hz
• Pixel clock frequency: 25.175 MHz
• Sync polarity: Horizontal sync negative,
Vertical sync negative
Notes
• The unit may handle signals having a similar
sync frequency and polarity as the same
signal.
• If the picture is not displayed correctly,
depending on the display timing variation,
adjust the display with the automatic
adjustment using the AUTO button or on the
menu.
• If the resolution of the input signal is other
than 640 × 480, characters may not be visible
clearly. This is due to pseudo reduction of the
size of the characters and is not a
malfunction.
• Noise may be displayed when the resolution
of the input signal is changed. This is not a
malfunction.
Power-Save Mode / Preset Timing
35