Unleaded Solder; Warning On Power Connection - Sony LMD-2450W Service Manual

1-4. Unleaded Solder

Boards requiring use of unleaded solder are printed with a lead free mark (LF) indicating the solder
contains no lead.
(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular
size.)
: LEAD FREE MARK
m
. Be sure to use the unleaded solder for the printed circuit board printed with the lead free mark.
. The unleaded solder melts at a temperature about 40 dC higher than the ordinary solder, therefore, it is
recommended to use the soldering iron having a temperature regulator.
. The ordinary soldering iron can be used but the iron tip has to be applied to the solder joint for a
slightly longer time. The printed pattern (copper foil) may peel away if the heated tip is applied for too
long, so be careful.

1-5. Warning on Power Connection

Use a proper power cord for your local power supply.
Plug type
Female end
Cord type
Rated Voltage & Current
Safety approval
1) Use an appropriate rating plug which is applied to local regulations.
1-16
The United States, Continental Europe
Canada
VM0233 COX-07/636
VM0089 COX-02/VM0310B
SVT H05VV-F
10 A/125 V 10 A/250 V
UL/CSA VDE
UK, Ireland, Australia,
New Zealand
– 1)
VM0303B
CEE (13) 53rd (O, C)
10 A/250 V
VDE
LMD-2450W