Anode Cap (20 Inch); Warning On Power Connection - Sony TRINITRON PVM-14L1 Service Manual

1-6-6. Anode Cap (20 inch)
Short-circuit the anode of the picture tube and the anode cap to the metal chassis, picture tube shield or carbon painted on
the picture tube, after removing the anode.
* Removal Procedure
"Ot
(1) Turn up one side of the rubber capinthe (2) Using a thumb, pull up the rubber cap (3) When one side of the rubber cap is
©
Anode button
direction indicated by arrow @. firmly in the direction indicated by separated from the anode button, the
arrow (®). anode-cap can be removed by turning
up the rubber cap and pulling up it in
* Handling Precautions the direction of the arrow ©.
(1) Do not scratch the surface of anode cap with a sharp object.
(2) Do not press the rubber so hard that it damages the inside of
anode caps. A shatter-hook terminal is built into the rubber.
(3) Do not turn the foot of the rubber over.
The shatter-hook terminal will stick out or damage the rubber.
1-7. Warning on Power Connection
Use a proper power cord for your local power supply.
Plug type LP-30B ee
Female end LS-13 VM0303B YC-35
Cord type SB-SVT HO5VV-F VCTF
Minimum cord set rating 10A/125V 10A/250V 7AM25V
Safety approval UL/CSA SEMKO, NEMKO, DEMKO, SEV, DENAN-HO
KEMA, El (FIMKO), CEBEC, VDE, BS
a) Note : Use an appropriate rating plug which is applied to local regulations.
1-12 PVM-14L1/14L1N 2/2011
SSM-1_-1/20L1