Table of Contents
Advertisement
This chapter provides notices, troubleshooting tips, and customer care, warranty, and
standards-compliance information.
6.1 Product Features
This chapter describes some of the special features that are associated with the AMD
FirePro™ W9000 product and are available through the Control Center software
application.
Note: Feature availability varies between AMD FirePro™ products and operating
systems.
6.1.1 Stereoscopic Glasses
Your AMD FirePro graphics card can enable quad-buffer stereo display, which is used
with special glasses to display images in 3D.
Quad buffering allows for smooth stereoscopic viewing under the following
conditions:
•
•
Note: Refresh rates below 120 Hz will display noticeable "shutter" interference.
Because many LCD displays cannot achieve a sufficient refresh rate, CRT displays are
usually preferable.
6.1.1.1 Quad Buffer Stereo Modes
The following modes are available:
•
•
© 2012 Advanced Micro Devices Inc.
The Enable Quad Stereo option has been selected in the Control Center
application through the Workstation aspect.
Note: You must reboot your system after enabling quad buffering for the first
time.
An appropriate quad buffer stereo mode has been selected in the Control Center
application through the Workstation aspect.
Active Sync (Sync Signal Enabled): Select this option for display devices
connected to the active synchronization connector on the graphics card. The
setting is selected by default.
Auto-Stereo (Vertical Interleaved): Select this option for auto-stereo display
devices that support vertically interleaved stereo image pairs.
Chapter 6
Reference
AMD FirePro™ W9000 Graphics Accelerator
Advertisement
Table of Contents
