Chapter 1 Getting Started Before you begin installing your new AMD FirePro V4900 graphics card, please make sure you have the proper system requirements and have completed the required preinstallation tasks as outlined in this chapter. 1.1 System Requirements Table 1–1 AMD FirePro V4900 Minimum System Requirements...
2 Getting Started 4. Install your new AMD FirePro graphics card. 5. Reassemble and connect your computer system. 6. Install the AMD FirePro drivers and configuration software from the ATI Installation disc. 1.3 Before You Begin Installation Once you have determined that your system meets the minimum requirements, please perform the following tasks before installing your AMD FirePro V4900 workstation graphics card.
This chapter contains information on special features associated with the AMD FirePro V4900. 2.1 MultiCard Support MultiCard Support is a feature that enables you to fully use the power of your AMD FirePro graphics cards when more than one card is installed in a single system with multiple displays.
Chapter 3 Hardware Installation This chapter details how to install your AMD FirePro V4900 card in your system. Note: AMD recommends that you install/upgrade all AMD FirePro hardware products in your system before you install/upgrade your drivers and the AMD Accelerated Parallel Processing (APP) Software Development Kit (SDK).
Page 16
Make sure all internal cables are clear of the slot. 6. Align your AMD FirePro graphics card with the PCIe slot and press it in firmly until the card is fully seated. You may need to hold open the PCIe card slot- locking mechanism with your finger when you seat the card.
Your monitor will be running in a basic (VGA) video mode. Higher refresh rates are not available at this stage of the installation. Once you have installed the AMD FirePro drivers and software, you can use the Windows®Display Properties dialog to adjust your video settings and configure multiple monitors.
Note: Monitors connected via passive adapters must all have the same resolution and refresh rate. Adapters not included with your AMD FirePro V4900 can be purchased directly from AMD’s Web site or through your local AMD resellers. Different types of displays can be combined within the following parameters: Your AMD FirePro V4900 has two clocks and either two DisplayPort connections •...
Use the following procedure to attach a display using an adapter. 1. Turn off your computer and monitor. 2. Plug the adapter into the connection from your AMD FirePro card and tighten the thumbscrews (if there are any). 3. Connect your display's cable to the adapter and tighten the thumbscrews (if there are any).