Grease Steering Cylinder Rod And Head Ends - Doosan DL220 Operation And Maintenance Manual

F. Rear Axle pivot (1, Figure 42), 3 locations on right
side of machine. Use remote grease fittings mounted
on frame shown in Figure 43.
Grease Steering Cylinder Rod and Head
Ends
1. Steering cylinder rods, 2 locations, one on each side of
machine.
2. Steering cylinder head ends, 2 locations. Use remote
grease fittings mounted on frame. (1 and 2, Figure 45).
Reference Number
1 and 2,
50 Hours
3,
250 Hours
Inspection, Maintenance and Adjustment
4-34
Remote Grease
Fittings
Steering Cylinder
Head Ends
Drive Shaft
Center Bearing
Figure 42
REAR PIVOT
FRONT PIVOT
Figure 43
Figure 44
Figure 45
1
FG015615
FG008094
FG008101
1
2
3
FG001640
OP001015