Alert Settings - Uniden BW4301 Owner's Manual

VOX Sensitivity settings
VOX (Voice Activation) allows you to set the sound sensitivity for the
camera. This function identifies the volume of the baby's sound or crying.
When it is above the set threshold, the monitor screen will lit up when it is
in Eco mode or the screen is in standby mode.
1. Select
Alarm settings
select "Vox Sensitivity" settings.
2. Select "Low, Middle, High, Off" as needed and press OK to confirm.
3. Press BACK button to exit.
OK:Select
Alarm settings
Note: There is no audible alert for VOX.

Alert Settings

Temperature alert settings
When it is too hot or too cold in your baby's room, the temperature alert
will push a notification to your monitor.
1. Select
select "Temperature Alert" settings.
OK:Select
2. Select "Celsius, Fahrenheit" as needed and press OK to confirm.
OK:Select
3. Select "Alert" "ON, OFF" as needed.
4. Press BACK button to exit.
OK:Select
OK:Select
Firmware settings
16
Alert Settings, press OK to enter the settings page, and
MENU:Return
Alert Settings, press OK to enter the settings page, and
MENU:Return
MENU:Return
MENU:Return
MENU:Return
Low
Middle
OK:Select
°c
°
F
≤ 14
Low
Middle
OK:Select
OK:Select
0 9 : 0 0
1 2 : 0 0
1 5 : 0 0
1 8 : 0 0
°c
OK:Select
°
F
≤ 14
OK:Select
High
Off
MENU:Return
ON
OFF
≥ 29
High
Off
MENU:Return
MENU:Return
＞
MENU:Return ON
OFF
≥ 29
MENU:Return