Kenmore KC -50C01-BSSC User & Care Manual page 25

Side Table Assembly
16
 Use 8 pieces of M5 x 12mm (A) bolts to attach the right & left side tables to the grill.
 Attach the 8 bolts to the four legs but leave them loose about 1/8" gap; do not tighten
them at this time.
 Use 3 pieces of M4 x 8mm bolts (C) to attach accessories hooks (10) to the right-side
table (9).
 Attach the right table (9) by aligning it with the bolts attached to the legs on the right
side and slide down the table onto the bolts; use the keyhole slot to facilitate installation.
Once it's in place, tighten the bolts securely.Then tighten the bolts M5x60mm(B) of the
legs.
 Attach the left table (18) by aligning it with the bolts attached to the legs on the left
side and slide down table onto the bolts; use the keyhole slot to facilitate installation.
Once it's in place, tighten the bolts securely.Then tighten the bolts M5x60mm (B) of the
legs.
 Attach the smart thermometer (19) to the left table (Note: It is magnetically held in
place).
M5 x 12mm Bolt
Qty: 8 pcs
18
M4 x 8mm Bolt
Qty: 3 pcs
25