Table of Contents
Advertisement
Connection with DVD/monitor receiver (CQ-VD7001U)
Connection with DVD/monitor receiver with CD/DVD changer control (option, CQ-VD7001U)
Note: Refer to the operating instructions for the connected devices, in addition.
Extension Cord
(BRAKE/VIDEO-CONT/ACC/BATT/DIN/RCA/GND)
Ground
Lead
To a clean, bare metallic part of the car chassis
Power
ACC
ACC
Lead Not used. Do not connect the Power Lead
(ACC) if the control unit is equipped.
BATTERY 5A
Battery Lead
To the car battery, continuous + 12 V DC.
Video Output (Yellow)
Audio Output (L)
(White)
Audio Output (R)
(Red)
Note: Select [VTR] in [CH INPUT] of the [INPUT/OUTPUT] menu in advance if you would like to watch the display of the
DVD changer with CQ-VD7001U
DVD Changer
CX-DH801U
H
V
H
B
C
V
Fuse 5 A
M4X5mmMAX
C
V.A.B
H.A
u
REMOTE-IN
Remote-In
(RCA) (Black)
Not used.
(Black)
Parking Brake Lead
(Blue/yellow stripe)
(Red)
Video control Lead (output)
(Green/yellow stripe)
(Yellow)
Not used.
RCA Cable
(R) (Red)
Changer/AUX/XM receiver
Input Connector
(L) (White)
CH/AUX IN
VTR IN
(Yellow)
Video Input Terminal
(a
page 9).
Note: Never use both Remote-Ins
(one is mini-pin jack, the other is RCA
jack) at the same time. Failure to
observe this may cause misoperation.
RCA Cable (option)
Be sure to wire the park-
PARKING BRAKE
ing brake for safety and
preventing accident.
VIDEO-CNT
DIN Cable
(Black)
To the changer
connector.
DIN Connector
CQ-VD7001U
(option)
CX-DH801U
38
Remote-out
(Black)
65
Advertisement
Table of Contents
