Table of Contents
Advertisement
Settings:
GENERAL
AUDIO
TV TYPE
(TV standard format setting)
MULTI. SYSTEM
(Auto selection of a TV standard format)
The unit will transmit the same TV standard formatted signal
17
as the output of playing video software.
(a
page 8, 56)
Press and hold [OSD] (NTSC/PAL) for more than 6 seconds
to toggle between NTSC and PAL forcibly.
Press and hold [OSD] (NTSC/PAL) for more than 6 seconds
twice when the current mode is "NTSC". (When NTSC for-
matted software is playing.)
NTSC
(NTSC)
The unit transmits the NTSC formatted signal in either case,
playing an NTSC formatted video or a PAL formatted video.
(a
page 8, 56)
Press and hold [OSD] (NTSC/PAL) for more than 6 seconds
to toggle between NTSC and PAL forcibly.
PAL
(PAL)
The unit transmits the PAL formatted signal in either case,
playing an NTSC formatted video or a PAL formatted video.
(a
page 8, 56)
Press and hold [OSD] (NTSC/PAL) for more than 6 seconds
to toggle between NTSC and PAL forcibly.
Note:
• The use of NTSC as "TV TYPE" is recommended.
• Make the video format of the DVD changer correspond to
the video format of the monitor display.
: Previous menu
RETURN
44
CX-DH801U
GENERAL
PREFERENCE
NTSC
Default:
[ } ][ { ][ ] ][ [ ]: Select
TV MODE
(Display aspect setting)
PAN & SCAN
(Pan & Scan display aspect)
Display aspect is set to Pan & Scan.
(a
page 56)
LETTER BOX
(Letter Box display aspect)
Display aspect is set to Letter Box.
(a
page 56)
WIDE
(Wide Display aspect)
Display aspect is set to Wide.
(a
page 57)
[ENTER]: Determine
Default:
WIDE
[RET]: Exit
Advertisement
Table of Contents
