Windshield Defrosting And Defogging; Manual Climate Control System - Hyundai Elantra N Owner's Manual

WINDSHIELD DEFROSTING AND DEFOGGING

WARNING
Windshield heating
Do not use the or
during cooling operation in extremely
humid weather. The difference between
the temperature of the outside air and
that of the windshield could cause the
outer surface of the windshield to fog
up, causing loss of visibility. In this case,
set the mode selection knob or button
to the position and fan speed control
knob or button to lower speed.
For maximum defrost performance,
set the temperature control knob
to the highest temperature setting
(rotated all the way to the right) and
the fan speed control to the highest
setting.
If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window,
side view mirrors, and all side
windows.
Clear all snow and ice from the
hood and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up inside of the
windshield.
position

Manual Climate Control System

To defog inside windshield
[A] : Type A, [B] : Type B
1. Select any fan speed except "0"
position.
2. Select the desired temperature.
3. Select the or
4. Fresh mode air will be selected
automatically. Additionally, the
air conditioning (if equipped) will
automatically operate if the mode is
selected to the
If the air conditioning and fresh mode
are not selected automatically, press the
corresponding button manually.
05
OCN7050122N
position.
position.
5-101