Windshield Defrosting And Defogging; To Defog Inside Windshield - Hyundai KONA Electric 2023 Owner's Manual

WINDSHIELD DEFROSTING AND DEFOGGING

WARNING
Windshield heating
Do not use the ( ) or (
during cooling operation in extremely
humid weather. The difference between
the temperature of the outside air and
that of the windshield could cause the
outer surface of the windshield to fog
up, causing loss of visibility. In this case,
set the mode selection knob or button
to the ( ) position and fan speed
control knob or button to lower speed.
For maximum windshield defrosting,
set the temperature control knob to
the highest temperature setting and
the fan control knob to the highest fan
speed. Select the front defrost button
on the climate control display.
If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window,
outside side view mirrors, and all side
windows.
Clear all snow and ice from the
hood and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up inside of the
windshield.

To Defog Inside Windshield

) position
1. Select any fan speed except "0"
2. Select the desired temperature.
3. Select the (
4. The outside (fresh) air will be selected
Check to make sure the air intake control
is in Fresh mode. If the air intake control
indicator light is illuminated, press the
button once to enable Fresh mode
(indicator light OFF).
If the (
speed is automatically increased.
position.
) position.
automatically.
) position is selected, the fan
05
OOSEV048312
5-93