Launch Control - Hyundai Elantra N Owner's Manual

Driving Your Vehicle

Launch Control

Launch Control provides maximum
acceleration on dry asphalt roads.
Launch Control not to be used on any
other surface. Excessive slip might occur
and harm your vehicle.
Prerequisite for activation
Launch Control gets ready to be
activated, when the following
prerequisites are satisfied.
All doors, hood and trunk are closed.
The vehicle is at a complete stop.
No malfunction warning lights related
to the engine and ESC (Electronic
Stability Control) is in Sport or Off
mode.
NOTICE
Launch Control is intended for use
at a closed race track with dry road
surface and not intended for use on
public roads. It will not compensate
for driver's who are inexperienced or
lack familiarity with the race track.
Do not use Launch Control during
break-in period of the vehicle.
Constant use of Launch Control can
put enormous stress on the vehicle
resulting in premature wear of
related components.
6-52
1. Press the 'Launch control' tab.
2. Press the '< (Left)' or '> (Right)' to set
the engine RPM for launch control.
3. Press 'Activate' to enter Launch
Control ready state.
4. Press 'Reset RPM' to reset engine
RPM to default launch control engine
speed.
OCN7N061232N