Forward Safety Warning Light; Low Beam Indicator Light; High Beam Assist Indicator Light; Cruise Indicator Light - Hyundai Elantra N Owner's Manual

Low Beam Indicator Light (if
equipped)
This indicator light illuminates:
When the headlights are on.
High Beam Assist indicator
light
This indicator light illuminates:
When the High Beam is on with the light
switch in the AUTO light position.
White: When High Beam Assis is ready
to operate.
Green: When High Beam Assist is
operating.
If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
system will switch the high beam to low
beam automatically.
For more information, refer to "High
Beam Assist (HBA)" in chapter 5.
Forward Safety Warning
Light
This warning light illuminates:
When you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
When there is a malfunction with
Forward Collision-Avoidance Assist. In
this case, have your vehicle inspected
by an authorized dealer of HYUNDAI.
For more information, refer to "Forward
Collision-Avoidance Assist (FCA)" in
chapter 7.
Lane Safety Indicator Light
This indicator light illuminates:
[Green] When you activate Lane
Keeping Assist by pressing the Lane
Safety button and all of the function
operating conditions are satisfied.
[White] When Lane Keeping Assist
operating conditions are not satisfied
or when the sensor does not detect
the lane line.
[Yellow] When there is a malfunction
with Lane Keeping Assist.
In this case, have your vehicle inspected
by an authorized HYUNDAI dealer.
For more information, refer to "Lane
Keeping Assist (LKA)" in chapter 7.

Cruise Indicator Light

This indicator light illuminates:
When Cruise Control is enabled.
For more details, refer to "Cruise
Control (CC)" in chapter 6.

SPORT Mode Indicator Light

(if equipped)
This indicator light illuminates:
When you select "SPORT" mode as
drive mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.
04
4-19