Wi-Fi Network Requirements; Wireless Guidelines - Technogym BIKE LIVE Pre-Installation

5.3 WI-FI NETWORK REQUIREMENTS

Connect the product to the Wi-Fi network, taking into account the following requirements:
• Standard: IEEE 802.11 a/b/g/n/ac at 5GHz or 2.4GHz;
• Security Protocol: WEP, WPA/WPA2, open (free) network;
The Protocol WPA2 Enterprise is not supported.
• There must be only one dedicated Access Point / Wi-Fi router that provides the service;
• DHCP enabled;
• It's recommended to avoid broadcasting the same SSID, through 2.4 and 5 GHz, at the
same time.
In case of professional Access Point or if the equipment is used in a public / company network (ho-
tel, fitness facility) you must cover the following additional requirements:
▪ Configure the Access Point to broadcast only one SSID (Service Set Identifier) needed for the
equipment installation. The SSID must not be hidden;
▪ Program in the display of equipment (Customer Menu 2406 --> Network-->Wi-Fi) just only the
SSID defined above;
▪ Frequency Band:
_5GHz band only (not automatic) is the configuration suggested;
_If the Access Point is not provided with 5GHz band, 2.4GHz is ok but might need
some channel fine tuning by the local IT company. The best practice for 2.4GHz
Wi-Fi configuration is enabling Wi-Fi on one of the following channels: 1, 6, 7, 8, 9,
10, 11, 12. Other channels: 2, 3, 4, 13, 14 might cause interference with Bluetooth
signal and it's best to avoid them.
_Avoid in any case to broadcast the same SSID, through 2.4 and 5 GHz, at the
same time.
▪ LEASE TIME : at least three days;
▪ SESSION TIMEOUT disabled (Typically achieved setting the timeout = 0).
For more details about Access Point (AP), refer to the AP technical specifications.

5.4 WIRELESS GUIDELINES

The following indications must be interpreted only as guidelines.
- 16 -
TECHNOGYM BIKE LIVE Pre-Installation Requirements
PIR-00161-EN - Uncontrolled copy if printed
Rev. 1.0