Titan TTB939SHR Manual page 9

TTB939SHR by TITAN
provided in this user manual.
8. Only use replacement parts and accessories supplied
and recommended by the manufacturer. Using third-
party parts will immediately invalidate the guarantee!
9. Do not leave the product working unattended and keep
it in a dry place out of children's reach.
10. Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
11. Before using, check the extension cord for signs of
damage and aging. Do not use the product if the cord is
damaged or worn. DO NOT TOUCH THE EXTENTION
CORD BEFORE DISCONNECTING THE SUPPLY.
12. Do not use the product if the extension cord is damaged
or worn.
13. Do not touch the cutting means before the product is
disconnected from the power supply and the cutting
means have come to a complete stop.
14. Whilst using the product, ensure the extension cord
does not become trapped under the wheels or feet.
15. Have your product serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct cutting attachments for the product and
ensure they are in good condition.
MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 9 MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 9
Safety information
2022/3/23 3:35 PM 2022/3/23 3:35 PM
EN
9