Titan TTB939SHR Manual page 20

Product functions / Operation
EN EN
Intended use
This electric impact shredder MIS2400 is designated with a rated power input of
2400 Watts.
The product is designed for cutting of fibrous and woody garden waste for
composting.
The product is not intended for shredding pieces of metal, rocks, bottles, cans,
etc. or soft waste such as kitchen rubbish.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Switching on/off
This product can only be operated in continuous
mode.
1. Turn the on/off switch (7) clockwise to
switch the product on (Fig. 7).
2. Turn the on/off switch (7) anti-clockwise to
switch the product off.
NOTE: The on/off switch (7) will automatically draw back to its original
position after release.
WARNING! The shredding means will continue to rotate for some time
even after the motor has been switched off!
Wait until they come to a complete stop before touching the product!
General operation
1. Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
Take care of any problem you find or have the product checked by qualified
specialist.
20
MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 20 MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 20
TTB939SHR by TITAN
OFF ON
7
Fig. 7
2022/3/23 3:35 PM 2022/3/23 3:35 PM