Titan TTB939SHR Manual page 7

TTB939SHR by TITAN
- after striking a foreign object to inspect the product
for damage;
- if the product starts to vibrate abnormally, for
immediately check.
17. Do not tilt the product while the power source is
running.
18. Keep extension cords away from moving parts to avoid
damages to the cords which can lead to contact with
live parts.
Maintenance and storage
1. When the product is stopped for servicing, inspection,
or storage, or to change an accessory, shut off the
power source, disconnect the product from the supply
and make sure that all moving parts are come to a
complete stop. Allow the product to cool before making
any inspections, adjustments, etc. Maintain the product
with care and keep it clean.
2. Improper maintenance will lead to malfunction/failure
of the product.
3. Inspect and maintain the product regularly. Keep all
nuts, bolts and screws tight to be sure the product is in
safe working condition.
4. Be careful during adjustment of the product to prevent
entrapment of the fingers between moving blades and
fixed parts of the product.
5. When servicing the shredding means be aware that,
even though the power source is switched off due to
the interlock feature of the cover, the shredding means
can still be moved.
6. Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
7. Wear strong work gloves when removing and re-
assembling the cutting blade.
MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 7 MNL_TTB939SHR_2400W Impact Shredder_GB_V1_220323.indd 7
Safety information
2022/3/23 3:35 PM 2022/3/23 3:35 PM
EN
07