Table of Contents
Advertisement
In - Dash Mounting
The Color Twinscope comes with mounting hardware to
mount the display in-dash. Four mounting screws and a
cutout diagram are included.
For in-dash mounting, the mounting base portion of the
Quick Disconnect Mount is removed. To remove the
mounting base loosen the thumb screw until it seperates
from the upper portion of the Quick Disconnect Mount.
While the cutout is included, dimensions of the cutout and
pilot holes has been included in the drawing below.
8.7" [220mm]
8.3" [211mm]
Loosen to remove
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Color Twinscope and is the answer not in the manual?
Questions and answers