Summary of Contents for Unfinished Furniture of Wilmington LIVE EDGE BE-9014TA
Page 1
ASSEMBLY INSTRUCTIONS Description : 90 IN LIVE EDGE BENCH Item No. : BE-9014TA AND BE-9014TB ITEM NO.: BE-9014TA AND BE-9014TB Printed in Vietnam ISSUED JUN 28, 2018 THIS ITEM IS PACKED IN TWO CARTONS - 1 -...
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect.
PART LIST BE-9014TB When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Base HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch...
Page 4
STEP 1 Attach base (E) to top (A) with bolts (1), and washers (3) and (4) as shown below. Tighten with Allen key (8). ¡ ¢ £ ¤ STEP 2 Insert support bar (C) and crossbar (B) into bases (E) as shown below. Attach the other base (E) to top (A) with bolts (1), and washers (3) and (4) as shown below.
Page 5
STEP 3 Attach crossbar (B) and support bar (C) to bases (E) with bolts (2) and u-washers (7) as shown below. Tighten with Allen key (8). Attach support bar (C) and side decorations (D) to top (A) with bolts (2), and washers (5) and (6) as shown below.