BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Back Seat (L – R) (L – R) Middle Back stretcher stretcher HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
Page 4
STEP 1 Attach seat (B) to the back (A) with bolts (1), and washers (3) and (2) as shown below. Tighten with Allen key (5). STEP 2 Attach arms (C) to the back (A) and seat (B) with screws (4) as shown below. Tighten with a screwdriver. ITEM NO.: BE-2904A Printed in Vietnam REVISED DEC 28, 2016...
Page 5
STEP 3 Insert stretchers (E) and (F) into legs (D), as shown below. Attach legs (D) to seat (B) with bolts (1), and washers (3) and (2) as shown below. Tighten with Allen key (5). Attach stretchers (E) and (F) to legs (D) with screws (4) as shown below. Tighten with a screwdriver. ITEM NO.: BE-2904A Printed in Vietnam REVISED DEC 28, 2016...