Table of Contents
Advertisement
The Pair Connection function consists of the following parameters:
I/O Pair Connection: This item is used to enable/disable the I/O pair connection.
Remote IP Address: The IP address of the remote input device.
Remote TCP Port: The Modbus/TCP Port of the remote input device.
Connection Timeout: The length of time that the OME-ET-7000/OME-PET-7000
module should wait for a connection to the remote input device.
Reconnect Interval: The reconnect interval is the amount of time between attempts
by the OME-ET-7000/OME-PET-7000 module to reconnect with the remote input
device.
Remote Net ID: The Modbus Net ID of the remote device.
Scan Time: The frequency that the remote input device will be polled.
Access Type: Enable/Disable the DI-to-DO (AI-to-AO) pair connection.
Local DO Base Address: The DO base address of the local DO register that will be
mapped to the remote DI device.
Remote DI Base Address: The DI base address of the Remote DI device that will
be mapped to the local DO register.
I/O Count: The I/O count mapped from the base address.
Communication Timeout: The period of time that the
OME-ET-7000/OME-PET-7000 module will wait for a response from the remote DI
device.
Page: 77
Advertisement
Table of Contents
