Omega OME-ET-7000 Series User Manual page 117

Step 5
Apply the zero calibration voltage/current to channel 0.
In this example, we use type code - 09 and its "Zero Input" is 0 V.
Type Code
Input Range -5V ~ +5 V
Step 6
Send the zero calibration command.
Double-click on address 831 to set it as ON. If the calibration is successful,
the value will return 0.
Step 7
Apply the span calibration voltage/current to channel 0.
In this example, we use type code - 09 and its "Span Input" is +5 V.
Type Code
Input Range -5V ~ +5 V
09
09
Page: 112