Omega OME-ET-7000 Series User Manual page 58

Range: In a manner, a different range can be set for each individual analog
output channel. Select the required voltage/current range from the respective
drop-down menus. For more detailed technical specifications related to the
output range for each analog output channel, please refer to: "Appendix E.
Analog Output Type and Data Format Table".
Slew Rate:
channels, i.e., the rate of change in the analog output voltage/current as it
changes from one output voltage/current to another. Select the most appropriate
value from the respective drop-down menus.
Power-on Value: A power-on value can be set for a specific analog output
channel, and the analog output channel will then generate the start-up value
output.
Safe Value: When communication between the Host PC and the
OME-ET-7000/OME-PET-7000 module is interrupted, the analog output
channels can generate a predefined safe value. This function can be enabled or
disabled by configuring the Host WDT Timeout setting.
For a more detailed description of these Modbus functions, please refer to:
"Appendix C. Modbus Application Notes".
This is the programmable output slew rate for the analog output
Page: 53