Omega OME-ET-7000 Series User Manual page 116

Modbus Address for Calibration
Register Points
00830
00831
00832
Note: When calibrating current type (i.e. type 06, 07 and 1A), the jumper of the
corresponding channel should be short. Refer to the link for details.
ftp://ftp.omega.com/public/DASgroup/products/OME-ET-7000_OME-PET-7
000/
Clicking the "Connection > Connect" in menu bar and fill out the
4.2
OME-ET-7017's IP address to set TCP Connection.
Double-click on address 830 to set it as "ON". (Enable Calibration)
4.3
Enable/Disable Calibration
0=Disabled
1
1=Enabled
1 Zero calibration command of ch0, 1 = run
1 Span calibration command of ch0, 1 = run
Description Access
Type
R/W
W (Pulse)
W (Pulse)
Page: 111