Table of Contents
Advertisement
Chapter 4
Communication Setup
Assigning an IP
Address, cont'd.
14
• The display shows:
IP SELECTION:
IP ADDRESS
• Press the Enter key. The display shows for example:
NETWORK:
IP ADDRESS
• Press the Enter key. The display shows for example:
IP ADDRESS:
192.168.1.79
• Read the automatically assigned IP address. When ready, press
the Enter key.
NETWORK:
NETMASK
• Press the Enter key. The display shows for example:
NETMASK:
255.255.255.0
•
Read the automatically assigned netmask address. When ready,
press the Enter key.
NETWORK:
DEFAULT ROUTER
• Press the Enter key. The display shows for example:
DEFAULT ROUTER:
192.168.1.1
• Read the automatically assigned default router address. When
ready, press the Enter key.
SETUP:
NETWORK
• Press the Setup key to leave the Setup Mode. Now the printer is
logically connected to your local network (LAN).
Refer to next page for an overview of the parts of the Setup mode
used in connection with setting up the EasyLAN 100i interface board.
A full description of the Setup Mode can be found in the Installation
& Operation manual for the printer model in question.
Intermec EasyLAN 100i – Installation Instructions Ed. 1
Advertisement
Table of Contents
