Intermec EasyLAN 100I Installation Instructions Manual page 13

Chapter 4 Communication Setup
Assigning an IP
Address, cont'd.
12
• The display shows:
NETWORK:
IP ADDRESS
• Press the Enter key. The display shows for example:
IP ADDRESS:
192.168.1.79
• Use the numeric keys and the period key to enter the desired IP
address. (The C key clears the last entered digit.) When finished,
press the Enter key.
NETWORK:
NETMASK
• Press the Enter key. The display shows for example:
NETMASK:
255.255.255.0
• Similar to the IP address, enter the desired netmask, then press
the Enter key.
NETWORK:
DEFAULT ROUTER
• Press the Enter key. The display shows for example:
DEFAULT ROUTER:
192.168.1.1
• Similar to the IP address and netmask, enter the address of the
default router (gateway), then press the Enter key.
SETUP:
NETWORK
• Press the Setup key to leave the Setup Mode. Now the printer is
logically connected to your local network (LAN).
Intermec EasyLAN 100i – Installation Instructions Ed. 1