UTC Fire and Security interlogix Concord 4 Installation Manual page 10

Chapter 1: Introduction
SnapCards
SuperBus 2000 8Z input
module (HIM)
SuperBus 2000 four-relay
output module (HOM)
Interrogator 200 audio
verification module
SuperBus 2000 energy saver
module (ESM)
SuperBus 2000 automation
module
SuperBus 2000 wireless
cellular gateway
SuperBus 2000 2-amp power
supply
4
The following SnapCards expand the system as described:
8Z input Snapcard: Provides eight additional hardwired zone
inputs, of which two are dedicated for using two-wire smoke
detectors.
4 output SnapCard: Provides four form C relay outputs that
can be set up to activate other signaling devices, based on
system events, schedules, or direct control.
4Z input/output combo SnapCard: Provides three hardwired
zone inputs, one two-wire smoke detector loop, and two
outputs that can be set up to activate other signaling devices,
based on system events, schedules, or direct control.
Provides eight additional hardwire zone inputs.
Provides four form C relay outputs that can be set up to
activate other signaling devices, based on system events.
Allows central station operators to listen in and talk to
occupants on the premises to verify the emergency when an
alarm report is received.
Provides a money-saving and convenient way to monitor and
control temperatures. The ESM uses low- and high-
temperature limits to save energy by overriding the existing
HVAC thermostat.
Provides a connection to a compatible home automation
device.
Allows users to control and monitor the status of their system
from the alarm.com internet website.
Provides an additional 12 VDC, 2 amps for powering system
devices and is supervised via the panel data bus.
Concord 4 Installation Manual