PROAIM Spark P-SPK-13 Assembly Manual

Dual-length slider

Spark Dual-Length Slider

(P-SPK-13)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

NOTE : The slider is available in 13"and 17" . You will get the slider according to your purchase.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the Spark P-SPK-13 and is the answer not in the manual?

Page 1 Spark Dual-Length Slider (P-SPK-13) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. NOTE : The slider is available in 13”and 17”...
Page 2 Spark Slider Setup • Screw-in Spark Slider on the tripod Stand (Not-Included). NOTE: We provide 1/4” screw attached with Spark Slider and also a conversion ring to convert 1/4” to 3/8” . • Screw-in the provided Conversion ring on 1/4” screw.
Page 3 YOUR PROAIM SPARK DUAL-LENGTH SLIDER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.