Introducing The Sr30 Handheld Scanner; Powering The Sr30; Understanding The Status Light - Intermec SR30 User Manual

Chapter 1 — Learning About the SR30

Introducing the SR30 Handheld Scanner

The Intermec SR30 Handheld Scanner is a general duty scanner
designed to collect data at the point of service (POS) for
customer applications.
Scanner
Trigger
SR30 Handheld Scanner

Powering the SR30

The SR30 is powered through the accessory cable connected to a
host device. Depending on which accessory cable you are using,
power comes from either the host device or the external power
supply. For more information about each cable, see
Accessories" on page

Understanding the Status Light

The status light on the SR30 indicates a successful decode of a
configuration or data bar code.
Status Light Description
Light State
Blinks green once The SR30 successfully scanned a data bar code.
Blinks green two
times
2
Status
light
35.
What It Means
The SR30 successfully scanned a configuration bar
code.
SR30 Handheld Scanner User's Guide
"Cable