Repairs; Maintenance; Cleaning The Imager's Window - Intermec ScanImage 1470 User Manual

This chapter provides maintenance instructions and explains how to troubleshoot the
147X imager.

Repairs

Repairs and/or upgrades to this product are to be performed only by an authorized
service center. To contact an authorized service center, call one of the following
numbers:
•
•
•

Maintenance

The 147X imager provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following periodic checks ensure
dependable imager operation.

Cleaning the Imager's Window

Reading performance may degrade if the imager's window is not clean. If the window is
visibly dirty or if the imager isn't operating well, clean the window with a soft cloth or
facial tissue dampened with water (or a mild detergent water solution). If a detergent
solution is used, rinse with a clean tissue dampened with water only.
The imager's housing may also be cleaned the same way.
Caution
Do not submerge the imager in water. The imager's housing is not water-tight. Do not
use abrasive wipers or tissues on the imager's window; abrasive wipers may scratch
the window. Never use solvents (alcohol or acetone) on the housing or window;
solvents may damage the finish or the window.
Conseil
Ne pas immerger l'imageur dans l'eau. Le boîtier de l'imageur n'est pas étanche. Ne
pas utiliser de chiffons ou serviettes abrasifs sur la fenêtre de l'imageur ; les chiffons
abrasifs peuvent rayés la fenêtre. Ne jamais utiliser de solvants (alcool ou acétone)
sur le boîtier ou la fenêtre ; les solvants peuvent endommager la couche de finition ou
la fenêtre.
U.S. service and technical support: 1-800-755-5505
Canadian service and technical support: 1-800-668-7043
Outside U.S. and Canada: Contact your local Intermec service supplier
Maintenance and Troubleshooting
9
9-3