Introduction; Before Using The Product; Intended Use; Product Lifespan - SHOWTEC Solaris 3.0 User Manual

Solaris 3.0
1.

Introduction

Before Using the Product

Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
● Showtec Solaris 3.0
● Seetronic power cable
● Remote interlock
● 2 sets with 2 keys for key switch
● 2 RJ45 connectors (shunt)
● 2 RJ45 connectors (yellow)
● Safety cable
● User manual

Intended Use

This device is intended for professional use as a laser projector to produce laser displays and show
effects. It is suitable only for indoor installation. This device is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Product Lifespan

This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in operation. This will reduce the wear and will improve the device's
lifespan.

Text Conventions

Throughout the user manual the following text conventions are used:
● References:
● 0–255:
● Notes:

Acronyms and Abbreviations

3D Three-dimensional
AC Alternating Current
EN European Standard (Europäische Norm)
IEC International Electrical Committee
IP Ingress Protection
Product code: 51360
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "turn the adjustment screw (02)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
LED Light-Emitting Diode
LSO Laser Safety Officer
MPE Maximum Permissible Exposure
NEN Dutch Standard (Nederlandse Norm)
NOHD Nominal Ocular Hazard Distance
4
Fig. 01