Maintenance; Storage; Environmental Protection - Parkside PWD 20 A1 Original Instructions Manual

1. Empty the dirt container (
every use. To fully empty the dirt con-
tainer, open the fastening clips (8) and
pour the residual liquid out.
2. Clean the dirt container (
damp cloth.
3. Wash the foam fi lter (15) with warm
water and soap and let it dry.
4. Tap out the contents of the textile fi lter
bag ( 16). If needed, wash it with
warm water and soap and let it dry.
5. Tap the optionally available folded
fi lter and clean it with a brush or hand-
brush.
6. When full, replace the paper fi lter bag
( 17) (for reordering, see "Spare
parts/accessories").

Maintenance

The device is maintenance free.

Storage

1. Wind the mains connection cable (9)
around the retaining brackets (25)
on the back of the appliance. Fix the
power cable using the cable clip
( 10).
2. Insert the disassembled suction pipes
(12) into the accessory holders on the
feet (7).
3. The accessory holders on the feet (7)
are used to store the accessory parts.
4. Store the device in a dry place and out
of reach of children.
Disposal/Environmental
6) after
Protection
Be environmentally friendly. Return the
6) with a tool, accessories and packaging to a recy-
cling centre when you have fi nished with
them.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details. Defective units returned to
us will be disposed of for free.
GB IE
Machines must not be disposed of
with household refuse.
NI CY
11