Configuring Voice Vlan In Manual Mode - H3C S5500-SI Series Operation Manual

Operation Manual – VLAN
H3C S5500-SI Series Ethernet Switches

2.2.3 Configuring Voice VLAN in Manual Mode

Table 2-4 Configure voice VLAN in manual mode
Enter system view
Enable the voice VLAN
security mode
Set an OUI address to be
one that can be identified
by the voice VLAN
Enable the voice VLAN
function globally
Enter port view
Set voice VLAN operation
mode to manual mode
Add the manual mode
port to the voice VLAN
Specify the voice VLAN
as the default VLAN of the
port
Enable the voice VLAN
function for the port
To do... Use the command...
system-view
voice vlan security
enable
voice
mac-address
mask
[ description text ]
voice
enable
interface
interface-type
interface-number
undo voice vlan mode
auto
Refer to section 1.4
"Port-Based VLAN"
Refer to section 1.4
"Port-Based VLAN"
voice vlan enable
Chapter 2 Voice VLAN Configuration
—
Optional
By default, the voice VLAN
security mode is enabled.
Optional
vlan
oui
By default, after the voice
oui-mask
VLAN is enabled, it has five
OUI addresses.
vlan vlan-id
Required
—
Required
The default voice VLAN
operation mode is automatic
mode.
Required
By default, all ports belong
to VLAN 1.
When you add a hybrid port
to the voice VLAN, you need
to configure the hybrid port
to keep or strip the VLAN tag
of the voice stream. Refer to
Table 2-2 "Port modes and
voice stream types".
Optional
By default, the default VLAN
of all ports is VLAN 1.
Whether
configure the voice VLAN as
the default VLAN of a port,
refer to Table 2-2 "Port
modes and voice stream
types".
Required
By default, the voice VLAN
function is disabled on a
port.
2-6
Remarks
you need to