H3C S5500-SI Series Operation Manual page 22

Operation Manual – VLAN
H3C S5500-SI Series Ethernet Switches
[Sysname-GigabitEthernet1/0/1] port link-type hybrid
# Configure VLAN 2 as the default VLAN of port GigabitEthernet1/0/1, and allow
packets of VLAN 2 to pass through the port.
[Sysname-GigabitEthernet1/0/1] port hybrid pvid vlan 2
[Sysname-GigabitEthernet1/0/1] port hybrid vlan 2 untagged
# Enable the voice VLAN function for the port GigabitEthernet1/0/1.
[Sysname-GigabitEthernet1/0/1] voice vlan enable
IV. Displaying and verification
# display the currently supported OUI addresses and the related information.
[Sysname-GigabitEthernet1/0/1] display voice vlan oui
Oui Address
0001-e300-0000
0003-6b00-0000
0011-2200-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
# Display current voice VLAN state.
[Sysname-GigabitEthernet1/0/1] display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 100 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------
GigabitEthernet1/0/1
Mask Description
ffff-ff00-0000 Siemens phone
ffff-ff00-0000 Cisco phone
ffff-ff00-0000 test
ffff-ff00-0000 Pingtel phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3com phone
MODE
MANUAL
2-10
Chapter 2 Voice VLAN Configuration