Safety Information - Silvercrest SMZC 500 C2 Quick Manual

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to correctly installed mains
►
power sockets that supply a current rating of 220 - 240 V∼,
at 50/60 Hz.
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
In event of operating malfunctions and before cleaning the
►
appliance, remove the power plug from the mains power
socket.
Always remove the power cable from the socket by pulling
►
on the plug, not on the power cable itself.
Do not kink or crush the power cable, and route the cable so
►
that it cannot be stepped on or tripped over.
Do not expose the appliance to humidity and do not use it
►
outdoors. If any liquid gets into the housing, disconnect the
appliance from the mains power socket immediately and
have it repaired by a qualified technician.
Never hold the appliance, power cable or power plug with
►
wet hands.
If the power cable or the motor unit are damaged, you must
►
have the appliance repaired by qualified technicians before
using it again. Do not attempt to open the motor unit housing.
This can lead to risks and also invalidates the warranty.
Disconnect the appliance from the mains power source
►
immediately after use. The appliance is completely free of
electrical power only when unplugged.
Never immerse the motor unit in liquid and do not allow
any liquids to enter the motor unit casing.
■ 4
│ GB│IE
SMZC 500 C2