Advertisement
Assembly 13
The wardrobe is supplied with a fixing kit which will secure it and help to guard against accidental tipping.
WARNING : Installation only to be carried out by a competent person.
Check the suitability of the wall before fitting.
Washer x 2
(for brick and masonry wall use only)
1. Place the wardrobe against the wall where it is to be fitted. Mark the wall at the centre of the top edge of the
wardrobe. Move the wardrobe away.
2. Using the 25mm screw, washer and the appropriate wall fixing, attach the fabric strap to the marked position.
3. Re-position the wardrobe. Attach the strap to the top of the wardrobe using the 15mm screw and the washer.
4. Proceed to Assembly 14 to fit and adjust the doors.
Before use, ensure that the strap is securely fixed to both the wall and the wardrobe.
The type of wall fixing you will require depends on the construction of the wall. See below for details. If in doubt,
seek professional advice:
Wood: If fixing to wood make
sure that it isn't chipboard as
screws can easily pull away
the core structure.
Screw (15mm)
Plastic wall plug
1
2
Brick or masonry: Use the
wall plug, provided you are
sure that your wall is sound.
Screw (25mm)
Fabric strap
3
Cavity wall: Special toggle
wall plugs needed.
Seek expert advice.
10
Advertisement
