Loading New Firmware; About Pcview - Javad LGG100 Operator's Manual

O P E R A T I O N
3

Loading New Firmware

The About PCView dialog box opens (Figure 3-6).
About PCView lists important information about the different hardware
accessories and software properties. This list includes the following, which
you will need if you contact JNS or your dealer:
• Receiver model
• Receiver IDs
• Firmware version
When finished, click OK, and then click File->Disconnect to prevent
4.
conflicts with serial port management.

Loading New Firmware

Base and Rover receivers must be loaded with the same firmware version. Use
the latest firmware version, available for download from the JNS website, to
ensure your receiver has the most recent updates.
Firmware is released as a compressed file that you download and decompress.
This file contains the following three files:
• ramimage.ldr - the Receiver board RAM file
• main.ldp - the Receiver board Flash file
Notice: You must load two files when loading new firmware.
These files must come from the same firmware package.
3-6 LGG100 Operator's Manual
Figure 3-6. About PCView
www.javad.com