Federal Communications Commission Compliance; Industry Canada Compliance; Safety Agency Approvals - Intermec EasyCoder 4400 Supplementary Manual

Intermec easycoder 4400: supplementary guide

Hide thumbs Also See for EasyCoder 4400:

Table of Contents

Available languages

For Users in Canada and the United States

Place this supplement in your manual.

Federal Communications Commission Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that can cause undesired operation.

This equipment is intended for operation in a commercial environment, in compliance with the

requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be

used in a residential environment; however, it has also been tested and found to comply with the

more stringent requirements for a Class B device, pursuant to Part 15 of the FCC Rules. It generates,

uses, and can radiate radio frequency energy. If not installed and used in accordance with the

instruction manual, it may cause interference to radio communications. If this equipment causes

interference, the user will be required to correct the interference at the user's own expense.

Note: In order to maintain compliance with FCC Rules, the I/O cables that interconnect between the device

and any peripheral must be as specified by Intermec.

Note: This product, tested in its base configuration, complies with the emission limits of FCC Part 15 Class B

as well as CISPR 22 Class B, as mentioned above. However, the user should be aware that when this product

is used with some accessories, it may only be compliant with Class A limits of both standards.

Caution

Changes or modifications not expressly approved by Intermec could void the user's

authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

This product is UL listed (UL 1950), CSA Certified (C22.2 #950) and TÜV GS Licensed (EN 60950) for

safety.

Table of Contents