Tektronix BERTScope BSA Series Instructions Manual page 16

Bit error rate analyzer declassi fication and security

Table of Contents

Clear and sanitize procedures

Clearing hard disk drives

4. Remove the jumper from J102.

NOTE.

If you need to remove the hard disk drive from the instrument for security purposes, do so before reassembling the

instrument.

5. Refer to the procedures to reinstall the chassis in the instrument enclosure while being careful not to damage any circuit

boards or cables. (See page 15, Reassemble the instrument.)

If your organization's security protocols allow the use of software to purge or sanitize hard drives, you can use commercial

software to erase free space on the hard drive before sending the instrument out for upgrades or repair. Follow the

instructions that come with the software to ensure that the erasure of sensitive data from the hard drive complies with your

organization's security protocols.

Tektronix BERTScope BSA Series Declassiﬁcation and Security Instructions

Table of Contents

Need help?

Do you have a question about the BERTScope BSA Series and is the answer not in the manual?