Using The Feed/Pause Button - Intermec EasyCoder 3400e User Manual

C d
Green LED
Orange LED
Yellow LED

Using the Feed/Pause Button

EasyCoder 3400e Bar Code Label Printer User's Manual
39
Helvetica Condensed Helvetica
Power/Data
Alert
Empty/Pause
Feed/Pause
LED states: This illustration shows what each LED state indicates.
LED States for Problems
Problem LED State
Over-Temperature If the printer overheats, the Alert LED flashes and the printer
stops. Do not try to troubleshoot or adjust the printer—just allow
the printer enough time to cool down and it will resume operation
on its own.
Media or System If the Empty/Pause or the Alert LED remains on, your printer is
Faults experiencing a media or system fault. For help, see Chapter 4,
"Troubleshooting."
The Feed/Pause button, located on the front of the printer, performs
several functions depending on the mode of the printer.
Feed/Pause Button Functions
Printer Mode You Want To
Idle Feed out one label or
a minimum specified
amount of media.
Continuously feed
media.
Take the printer
offline.
Printing Pause the printer.
Cancel the current
print job.
Chapter 2 — Operating the Printer
LED
Power/Data
Alert
Empty/Pause
3440U.012
What to Do
Press and release the Feed/Pause button.
Press and hold the Feed/Pause button.
When you release the button, the media
stops feeding.
Press the Feed/Pause button twice. Press
the button again to bring the printer
online.
Press and release the Feed/Pause button.
Press and release the button again to
resume printing.
Press and hold the Feed/Pause button
until the printer stops printing.
State Indication
Off Power off
On Power on
Flashing Receiving data
Off Printing or idle
Flashing Over-temperature
On System fault
Off Printing or idle
Flashing Paused
On Media fault
17